![background image](http://html1.mh-extra.com/html/desa/comfort-glow-s39nt/comfort-glow-s39nt_owners-operation-and-installation-manual_2486501003.webp)
3
107434
OWNER’S MANUAL
For more information, visit www.desatech.com
O
F
F
P
IL
O
T
O
N
H
I
L
O
PRODUCT
IDENTIFICATION
LOCAL CODES
Install and use heater with care. Follow all
local codes. In the absence of local codes, use
the latest edition of The National Fuel Gas
Code, ANSI Z223.1/NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
This heater is designed for vent-free opera-
tion. State and local codes in some areas
prohibit the use of vent-free heaters.
Figure 1 - Vent-Free Natural Gas Stove
UNPACKING
1.
Remove top inner pack.
2.
Tilt carton so that stove is upright.
3.
Remove protective side packaging.
4.
Slide stove out of carton.
5.
Remove protective plastic wrap.
6.
Remove screen by lifting and then pull-
ing forward.
7.
Remove log set by cutting plastic ties.
8.
Carefully unwrap log.
9.
Check for any shipping damage. If
stove or log is damaged, promptly in-
form dealer where you bought stove.
PRODUCT
FEATURES
SAFETY PILOT
This heater has a pilot with an Oxygen Deple-
tion Sensing (ODS) safety shutoff system.
The ODS/pilot is a required feature for vent-
free room heaters. The ODS/pilot shuts off
the heater if there is not enough fresh air.
PIEZO IGNITION SYSTEM
This heater has a piezo ignitor. This system
requires no matches, batteries, or other
sources to light heater.
Heater Controls
(Inside Door)
Screen
Stove
Cabinet
Logs