![background image](http://html1.mh-extra.com/html/desa/cffp18nt/cffp18nt_owners-operation-and-installation-manual_2486278015.webp)
www.desatech.com
123779-01C
15
Equipment
Shutoff Valve
Gas
Meter
Figure 12 - Checking Gas Joints (Natural
Gas Only) (actual fireplace may vary
from illustration)
Gas Regulator
INSTALLATION
Continued
PRESSURE TESTING FIREPLACE GAS
CONNECTIONS
1. Open equipment shutoff valve (see Figure
10, page 14).
2. Open main gas valve located on or near
gas meter for natural gas or open pro-
pane/LP supply tank valve.
3. Make sure control knob of fireplace is in
the OFF position.
4. Check all joints from equipment shutoff
valve to gas regulator (see Figure 11,
page 14 or Figure 12). Apply noncorrosive
leak detection fluid to all joints. Bubbles
forming show a leak.
5. Correct all leaks at once.
6. Light fireplace (see
Operation
, page 16).
Check all other internal joints for leaks.
7. Turn off fireplace (see
To Turn Off Gas to
Appliance
, page 17.
Log
Shoulder Screw
Screen
Figure 13 - Installing Log and Screen
(Mantel Not Shown)
INSTALLING LOG SET AND SCREEN
1. Remove log packaging material and
discard packaging. Gently place log over
the burner (see Figure 13). Do not allow
log to contact flame. If flame contacts log,
soot will be created.
2. Reattach screen by placing the notches
in the screen frame over the shoulder
screws and pushing down.