18
A q u a - B o x O w n e r ’ s M a n u a l
www.deroyal.com
800.251.9864
RIGID CANISTERS
1. Transport full canisters by cart or roll-stand to Aqua-Box
using PPE’s in accordance to hospital policy.
2. Ensure that the appropriate Evacuation Tube is attached
to the end of the suction hose (C).
3. If fluid treatment option is used, verify that there is
sodium hypochlorite (bleach) and that the yellow tube (F)
is submerged in the bleach. Check to see if the valve (E) for
bleach line is open (vertically oriented).
4. Open pour spout of the suction canister(s).
5. Insert the Evacuation Tube and seal the port with the
purple cap.
6. Turn the unit “On”.
a.
For Models 1500 and 1300, press the “Start” button
(A). If the Aqua-Box shuts off while evacuating,
simply press “Start” button (A) again.
b. For Models 1200 and 1000, turn the valve on the
right side of the unit to the “On” position.
7. Open Thumb valve (D) to begin evacuation.
8. When canister is empty, close thumb valve (D), replace
cap on canister, then discard empty canister.
9. After the canister is empty, leave the wand in the
canister and press the Rinse button. Fresh water will flow
back through the wand (about 600ccs). The suction will
automatically start to evacuate the remaining fluid. Close the
Thumb valve and press the stop button.
RINSING UNITS
A - “Start” Switch
B - “Kill” Switch
C - Suction Hose (Grey)
D - Thumb Valve
E - Treatment Solution Valve
F - Treatment Solution Tube (Yellow)
G - Suction Hose Hanger
H - “Start” Rinse Switch
A
H
B
D
G
C
F
E
