User Instruction Manual V1.01 (Rev.998 2010)
40
System Tools - Menu functions
1.
Setup Wizard:
This function allows for the easy addition of a new user, a
similar process to the Patient Information entered during the original Setup
Wizard, without modifying the current system Date and Time.
2.
System Info:
Displays the current Software Version Number, the unique
Serial Number of the device, the type of installed Laser Modules other
fixed system information.
3.
Battery Info:
Displays current battery voltage
4.
Proximity Cntl:
Allows the proximity detection system and associated safe
guards to be Disabled or Enabled (default is automatic.)
5.
Treat Notify:
Beep during treatment at set intervals.
6.
Sound Cntl:
Allows the sound and other warnings to be disabled or
enabled, or just warnings to be activated. Default is all audible alerts are
on.
7.
Backlight Cntl:
Allows the continual activation of the LCD display back
light, or automatic management. Continued activation will reduce battery
life. Automatic management will turn off the LCD backlight when no new
information is available, and turn on the LCD backlight when there is new
information to present on the display (default is automatic.)
8.
Power Cntl
: Allows the continual activation of the Dermaray Laser without
automatic shut down to sleep (default is automatic.)
9.
IR Sensitivity
: Adjust the effectiveness of the proximity detection.
Sensitivity can be reduced if IR disconnects more regularly than required.
10.
Power Level:
The installed Laser modules can be run at a percentage of
maximum, e.g. to limit the laser power output for safety, legal requirement
or particular types of treatment (default is 100%.)
11.
Laser Config:
A method to indicate the installed laser module type
including power and wavelength.
12.
Diode Config:
Turn individual laser modules on or off, then applies to all
treatments until changed or reset.
13.
Time Setup:
Set new Date and Time information.
14.
Reset ALL:
This function will delete all user entered information, historical
data and patient information. This is useful if giving the device to a new
patient or configuring.
15.
Hardware Test:
Test all aspects of the system including LCD backlight,
LCD text display, battery voltage, individual laser diodes, all laser diodes,
laser diode power levels, proximity detection system and keypad. System
requires a hardware reset after performing this function.
16.
Software Updt
: A function to upgrade operating system software within
Dermaray Laser. This function would only be performed with an original
Dermaray Laser upgrade kit.
17.
Exit
:
Exit System Tools Menu and return to the Main Menu.
