10
Blue buttons for direct selection
of a preset colour change
program (factory settings)
Button for individual modification
of a running colour change
program
Modification of Preset Programs:
Any colour change program can be modified during operation by the colour
control functions of your remote control:
Button
DARK
:
brightness of all colours will be decreased.
Button
BRIGHT
:
brightness of all colours will be increased.
Button
SPEED
:
speed of changing can be adjusted
(range: 1 - 255 seconds per each single colour).
Button
STOP
:
colour change will be frozen.
Button
START
:
colour change will be started.
Button
SOFT-HARD
:transition mode of colours can be changed:
SOFT = smooth, slow transition of colours;
HARD= abrupt, fast change of colours
9
Buttons for start, stop and
adjusting the speed of a running
colour change program
1.
Preset Programs (Factory Settings)
After you switched the colour light system on, you can immediately select one of
the preset programs. If you want to know how to create your own colour change
program, please proceed to chapter 2.
Select one of the preset programs with the blue buttons on your remote control
(from
1
to
8
):
blue button
1
: displaying all colours, following the RGB-concept.
blue button
2
: displaying only red colours.
blue button
3
: displaying only green colours.
blue button
4
: displaying only blue colours.
blue button
5
: Spring displaying green, yellow and orange colours
blue button
6
: Summer displaying red, pink and blue colours
blue button
7
: Autumn displaying red, brown and yellow colours
blue button
8
: Winter displaying white light with shifting brightness
Note: the selected program runs in an endless loop. After you pushed a button,
there is a delay of approximately 1 second until the selected program starts.
