background image

18

17

Subject to technical and optical modifications!

LIGHTBRUSH

®

 Master-Cube:

Item No. 09919100

Colour Light Cube with Control Unit

Type: RGB 2 x 590 / Master

W/H/D: 640 x 640 x 340 mm

Housing: Sheet steel, white

Weight: 13.0 kg

Power Input Plug 230 Volt, 16 A

Rated Power (Consumption): 120 VA

Power Output: 3200 VA

Features:

Microprocessor for the control of 16.7

million colours, can be controlled and

programmed with (optional) remote

control, 6 590 mm RGB fluorescent

lamps, 18 W each, data bus connector/

power connection to control slave cubes.

Slave unit connection up to 3200 VA,

depending on power supply.

LIGHTBRUSH

®

 Slave-Cube:

Item No. 09919200

Colour Light Cube 

without

 Control Unit

Type: RGB 2 x 590 / Slave

W/H/D: 640 x 640 x 340 mm

Housing: Sheet steel, white

Weight: 12.7 kg

Rated Power (Consumption): 120 VA

Features:

6 590 mm RGB fluorescent lamps, 18

W each, data bus connector/power

connection for the operation of additio-

nal slave cubes, 

without

 control unit and

remote control.

LIGHTBRUSH

®

 Master-Module 1200:

Item No. 09916400

Colour Light Module with Control Unit

Type: RGB 1200 / Master

W/H/D: 1246 x 87.5 x 153 mm

Housing: Alu-polished

Weight: 3.6 kg

Power Input Plug 230 Volt, 16 A

Rated Power (Consumption): 120 VA

Power Output: 3200 VA

Features:

Microprocessor for the control of 16.7

million colours, can be controlled and

programmed with (optional) remote

control, 3 1200 mm RGB fluorescent

lamps, 36 W each, data bus connector/

power connection to control slave mo-

dules.

Slave module connection up to 3200 VA,

depending on power supply.

LIGHTBRUSH

®

 Slave-Module 1200:

Item No. 09916500

Colour Light Module 

without

 Control Unit

Type: RGB 1200 / Slave

W/H/D: 1246 x 87.5 x 153 mm

Housing: Alu-polished

Weight: 3.5 kg

Rated Power (Consumption): 120 VA

Features:

3 1200 mm RGB fluorescent lamps, 36

W each, data bus connector/power

connection for the operation of additio-

nal slave columns, 

without

 control unit

and remote control.

LIGHTBRUSH

®

 Master-Module 590:

Item No. 09916600

Colour Light Module with Control Unit

Type: RGB 590 / Master

W/H/D: 1246 x 87.5 x 153 mm

Housing: Alu-polished

Weight: 2.5 kg

Power Input Plug 230 Volt, 16 A

Rated Power (Consumption): 60 VA

Power Output: 3200 VA

Features:

Microprocessor for the control of 16.7

million colours, can be controlled and

programmed with (optional) remote

control, 3 590 mm RGB fluorescent

lamps, 18 W each, data bus connector/

power connection to control slave mo-

dules.

Slave module connection up to 3200 VA,

depending on power supply.

LIGHTBRUSH

®

 Slave-Module 590:

Item No. 09916700

Colour Light Module 

without

 Control Unit

Type: RGB 590 / Slave

W/H/D: 1246 x 87.5x 153 mm

Housing: Alu-polished

Weight: 2.4 kg

Rated Power (Consumption): 60 VA

Features:

3 590 mm RGB fluorescent lamps, 18

W each, data bus connector/power

connection for the operation of additio-

nal slave columns, 

without

 control unit

and remote control.

Summary of Contents for Lightbrush RGB-Cube












Reviews: