Se�ngs
PHOS downlight
11
A few se�ngs s�ll need to be made to the projector head
in order to set up projec�on as you wish. To make this clea-
rer, the projector head is shown here without the assembly
casing and connec�on cable.
•
Carefully remove the casing from the projector head.
Some of the steps below require the projector to be switched on. Op�cal radia�on can cause high temperatures at close
range and may be dangerous for your eyes. Exercise appropriate cau�on. Only switch on the projector once the gobo has
been inserted. Carry out set-up work as soon as possible a�er switching on the device.
5. Se�ng up and opera�ng the projector
5.1 Inser�ng/changing the projec�on
mo�f (gobo)
1. Loosen the knurled screw.
2. Remove the gobo case.
WARNING! Risk of burns!
You can burn yourself on projector parts which have become hot.
▶
Let the device cool for at least 10 minutes before any set-up work.
WARNING! Op�cal radia�on hazard!
Op�cal radia�on can cause temporary or permanent eye damage.
▶
Never stare directly into the beam of light.
