4.
Insert the assembly ring into your ceiling structure.
5.
By �ghtening the countersunk screws, the clamps swi-
vel outwards, sink over the edge of the opening and
push the assembly ring slowly upwards. Tighten the
three countersunk screws evenly un�l the assembly
ring fits flat to the ceiling.
6.
The assembly ring is fixed in the ceiling by the clamps.
Ensure that no cables etc. are trapped.
The projector must now be connected electrically (see
sec�on 4.2). Subsequent connec�on is possible only if
there is a separate access point.
Moun�ng
PHOS downlight
9
Moun�ng
PHOS downlight
9
7.
Insert the projector assembly into the assembly ring.
The arrangement of the cylinder head screws for fixing
allows installa�on of the projector assembly in three
different posi�ons. Take this into considera�on when
aligning the projector head (see sec�on 5.2).
8.
Rotate the projector assembly in the guide un�l it
stops.