Se�ngs
PHOS downlight
13
•
Switch on the projector
5.2 Aligning the projector head
The suspension of the projector head in the assembly ca-
sing allows the head to be swivelled around its axis by 15°
from the ver�cal.
1.
Tilt the projector head into the desired posi�on.
5.3 Adjus�ng the focus of the mo�f
1.
Loosen the knurled screw.
2.
Reposi�on the projec�on lens within the case un�l
the mo�f is in focus.
3.
Tighten the knurled screw.
5.4 Aligning the mo�f
1.
Loosen the knurled screw un�l the gobo case can be
rotated.
2.
Rotate the gobo case un�l the mo�f has been aligned
as desired.
3.
Tighten the knurled screw.
WARNING! Risk of burns!
You can burn yourself on projector parts which have become hot.
▶
Let the device cool for at least 10 minutes before any set-up work.
WARNING! Op�cal radia�on hazard!
Op�cal radia�on can cause temporary or permanent eye damage.
▶
Never stare directly into the beam of light.
