www.deponti.com Assembly Manual
– Verdeca Pergola page
16
8.
Slide the rubber flap in and place gutter cover and fasten the screws.
9
. Rafter placing: There are two types of rafters. One without gasket (only delivered if 3
posts are used
–
width exceed 4.5 m) and two with gasket (this is located on the bottom of
the rail). When you look from the front side, the gasket must be inside of the system as you
see at below picture.
NOTE: When fastening the rail bolts to the back beam and front beam you might need
someone else according to rail weight and length.
10.
Check if the structure is level on all sides.
Deponti
Deponti
Deponti