www.deponti.com Assembly Manual
– Verdeca Pergola page
5
3. Product features
The Verdeca Pergola
is a retractable system which has a tilted form. It consists of an aluminium
structure and fabric. This product requires a minimum slope value due to its characteristic feature
and healthy drainage.
•
The Verdeca is water and airproof. It protects against sun and rain.
•
Wind resistance is 11 Beaufort by all sides open and 7 Beaufort by side enclosure.
Calculated for products with a front height of 250 cm according to Eurocode EN 1991-1-4
Terrain Category 4.
•
This system has limited snow load capacity which is 15 kg/m² therefore it should always be in
retracted position if snow is expected or it start snowing.
•
The fabric is made from exclusive fabric manufactured by Sioen. It is supported by fabric
profiles.
•
The belts are installed into each rail and driven by pulleys and single drive shafts to ensure
fabric movement.
•
The Verdeca Pergola retractable system is operated by an electric motor via a radio control
transmitter.
Available dimensions of the Verdeca:
Width (mm):
4000 / 5000 / 6000
Projection(mm):
3000 / 3500 / 4000
This product requires a min. slope value due to its characteristic feature and healthy drainage. The
slope value depends on the product dimensions.
Below table is showing the minimum slope values [cm] for all available dimensions.
If the Deponti Pergola Verdeca is installed with a slope of > 25% the product will be out of warranty.
*Optional: built-in LED lighting in the fabric
Application type:
The Verdeca has a retractable system with a tilted form and has to be mounted to a wall.
With a single motor opening and closing of the roof is motorized and controlled by a remote control
Minimum slope [cm]:
3000
3500
4000
Width [mm]
Rail centre [cm]
4000
400
42
49
57
5000
250
26
30
35
6000
300
31
37
42
Projection [mm]
!