-2 C hecking/first 50 hours
(1) Replace engine oil
Replace the engine oil at 50 hours only the first time and
every 100 hours after.
©Remove the engine oil drain plug and discharge oil
completely. It can be discharged easily when the
engine is warm.
© After engine oil is discharged, tighten the plug firmly.
© Supply new engine oil through the oil filler until it
reaches the notched line of the "H” on the dipstick.
@ After engine oil is supplied, run the engine for a few
minutes. Check if oil remains at the level between
H andL.
(2) Replace engine oil filter cartridge
Replace the engine oil filter cartridge at 50 hours only first
time and every 200 hours after second time.
Remove the drain plug and discharge oil completely in
advance.
© Remove the cartridge using filter wrench.
© Insert the new cartridge.
© Screw in the cartridge by hand. Once the gasket comes
into contact with the face of the seal, tighten the
cartridge using the filter wrench.
®
Run the engine for a while and check to see if there are
any oil leakages. Stop the engine. After the engine has
stopped for about 10 minutes, check the oil level gauge.
If there is a shortage of oil, refill the oil.
5arts number of oi I filter cartridge:
Model name
Parts number
Parts number of
manufacture
DCA-13,15LSK
Y06020 41173
16414-32433
(3) Drain the fuel tank
Summary of Contents for DCA-13LSK
Page 55: ...O p t i Generator connection diagram DCA I3LSK 200V class 51...
Page 56: ...52...
