Connecting the Balance to AC Power
The balance is powered by an AC adapter. Make sure that the voltage
rating printed on this unit is identical to your local line voltage.
If the voltage specified on the label or the plug design of the AC adapter
does not match the rating or standard you use, please contact your dealer.
Use only original adapters. To operate the balance using an
external rechargeable battery pack, see “Accessories.”
Safety Precautions
The AC adapter rated to Class 2 can be plugged into any wall outlet
without requiring any additional safety precautions. The ground terminal is
connected to the balance housing, which can be additionally grounded for
operation. The data interface is also electrically connected to the balance
housing (ground).
Connecting Electronic Peripheral Devices
Make absolutely sure to unplug the balance from AC power before you
connect or disconnect a peripheral device (printer or PC) to or from the
interface port.
Leveling the Balance Using the Level Indicator
At the place of installation, level the balance using the leveling feet so that
the air bubble is centered within the circle of the level indicator.
3
Memo:
Note:
RS232
Port
Bubble
Level
Indicator
Power
Receptacle
Bubble
Level
Indicator
RS232
Port
Power
Receptacle
Menu
Access
Switch
Menu
Access
Switch
