Blocking the Keys
You can block all keys on the balance (except for ON/OFF ).
- accessible
(Menu Code 8 3 1*)
- blocked
(Menu Code 8 3 2)
Below-Balance Weighing
A port for a below-balance weighing hanger is
located on the bottom of the balance.
For Balances with an Analytical Draft Shield
Chamber:
To hook a sample on the hanger, open the below-
balance port by turning the cover plate.
For Precision Balances (Weighing Capacity of <10
kg):
To open the below-balance port, remove the
cover plate from the bottom of the balance.
Now you can attach a sample using a suspension
wire, for example.
Common applications for below-balance
weighing include density determination and
immersing a sample in a special atmosphere (medium for reaction).
When you use the below-balance weighing hanger, you must
install a shield for protection against drafts.
Fastening an Antitheft Locking Device (for toploading balances only)
To fasten an antitheft locking device, use the lug located on the rear panel
of the balance.
14
Memo:
Note:
