65 67 510 D3642
28
D3642
.
201.01.03
.
02 01.2018
4 Operation
Dentsply Sirona
4.2 Operation via the dentist or assistant element
Operating Instructions LEDview Plus
2. Use the – and + keys to adjust the desired brightness of the operating
light (7 levels). The – key reduces the brightness, the + key increases
the brightness.
3. Use the – and + keys to adjust the desired color temperature of the
operating light (3 levels). The – key reduces the color temperature,
the + key increases the color temperature.
4. Touch the
Sensor control key.
ª
If the key is highlighted in orange, the contactless sensor can
control the operating light. The keys for adjusting operating
distance are displayed.
5. Use the – and + keys to set the desired operating distance. The – key
reduces the operating distance, the + key increases the operating
distance. You can check the setting directly on the operating light
without leaving the settings screen. The adjustment should be
selected in such a way that unintended operation of the contactless
sensor is not possible.
6. Touch the Sensor control key again to switch off the sensor control.
ª
The key is no longer highlighted in orange and the keys for
adjusting operating distance are hidden.
Switching the Clean mode on/off on the EasyTouch
The contactless sensor can be made inoperable using the Clean mode
for the dentist element.
This mode is used to make sure that no unwanted functions can be
accidentally triggered while cleaning the surfaces of the operating light
(see "Cleaning and disinfecting lamp components" [ → 43]).
➢ Press the
Clean fixed key on the dentist element.
ª
The Clean mode of the dentist element and operating light is
activated.
➢ Press the
Clean fixed key on the dentist element for > 3 seconds.
ª
The Clean mode of the dentist element and operating light is
deactivated.
Clean
Summary of Contents for LEDview Plus
Page 1: ...New as of Operating Instructions 01 2018 LEDview Plus English Operating Instructions...
Page 2: ......
Page 51: ......
