dentalfarm Photopol, Maintenance Manual

Page: 3 / 12

4. GENERAL PRECAUTIONS
Read carefully the present manual before carrying out any starting, operating or
maintenance operation on the machine
Safety of the User depends on the skillness, on the good sense and on the caution
when using the machine; for this reason, it is of utmost importance to know in detail
the allocation and the function of all the controls
The final User of the machine is a skilled and well trained professional and not
merely an occasional worker
Check regularly the parts which tend to wear out because of their specific working
conditions
Do not tamper the electrical wiring system of the machine
The built-in safety mechanisms shall in no way be removed or modified
Do not allow unauthorized persons to try to repair the machine.
5. INSTALLATION INSTRUCTIONS
/!\
ATTENTION
Installation of this machine is quite easy but it must be carried out paying
utmost attention in order to avoid any mistake which may originate
problems during operation, inconvenience or even damages.
1. Place the machine on a suitable work bench, in a stable position
2. Check the plate data, referring to the electrical feeding and the absorption
3. Connect the feeding cable to the plug placed on the left side of the unit and plug the
other end into an approved 220v AC - 50Hz socket with ground connection.
4. Open the door and remove the packing material protecting the lamps and other internal
components.
5. If the bell-jar is present, connect the vacuum pump to the fitting located on the left side
of the unit, just above the feeding socket.