DentalEZ RAM VAC COSP22S, User Manual

Page: 29 / 41

www.DentalEZ.com 866-DTE-INFO
26
Osprey
TM
Compressor
PN: 1045DOC_E
Section V Care
Preventive Maintenance Schedule
This is a recommended schedule for a
compressor in a clean, dry environment.
Any site other than speci fi ed will decrease
maintenance time exponentially.
Test for Air Leaks
First week and
annually thereafter
Replace Intake Filters Annually
Replace Coalescing
Filter
Replace annually or
when fi lter indicator
moves to completely
red while running (see
Filter Element Service
Indicator diagram)
Replace Particulate
Filter
Replace annually or
when fi lter indicator
moves to completely
red while running (see
Filter Element Service
Indicator diagram)
Inspect Dryer Annually
Test Safety Valves Annually
Replace Dessicant
Cartrides
Every fi ve (5) years
Osprey smart models: Reset the 2,000
hour maintenance light by navigating to the
maintenance screen on the C2 control and
pressing the RESET button.
Osprey basic models: There is no maintenance
alarm.
Maintenance (Continued)
Replacing Intake Filter
Tools Required
• Phillips-head Screwdriver
NOTE: All models us the same intake fi lter.
1. Turn compressor OFF .
a. For smart models, use the STOP button on
the C2 control.
b. For basic models, use the switch toggle,
turning it to the o ff position.
2. Remove power from the compressor.
3. Remove intake fi lter cap by removing two
screws (Figure 17a) .
4. Remove intake fi lter and discard.
5. Install replacement fi lter and replace fi lter cap
(Figure 17b) .
6. Return power to the compressor.
7. Return compressor to service.
Figure 17. Remove intake fi lter cap and replace intake fi lter
Intake
Filter Cap
Screws
(2)
Intake
Filter
a
b
When servicing this compressor, only use RAMVAC
approved service parts. Utilizing non-approved
components could lead to system damage and
possible termination of product warranty. Circuit
diagrams, parts lists and other required information
is available to service personnel by contacting
RAMVAC.