DentalEZ RAM VAC COSP22S, User Manual

Page: 16 / 41

13
www.DentalEZ.com 866-DTE-INFO
13
PN: 1045DOC_E
Section III Installation
Filter Drain Kit (Continued)
Assembly
1. To help in determining the routing of the
drain hose, read the following tips on proper
installation.
• The connection at the bottom of the
coalescing fi lter is designed to work with
either the elbow fi tting or the 3/8" hose
provided in the kit, depending on space
constraints in the utility room.
• The drain hose will require a steady
downward slope to the drain.
• Never route the drain hose assembly across
tra ff ic areas in the utility room. This could
create tripping or falling hazards that could
result in injury to personnel.
2. The connections for installing the fi lter drain are
a “push to connect” style of fi tting and do not
require any tools to install. After determining
proper routing, simply insert either the hose end
or the elbow fi tting into the fi tting on the bottom
of the coalescing fi lter bowl. Apply light force
until the item stops. Gently pull the opposite
direction on the hose or fi tting to determine if
they have properly seated into the connection.
If the fi tting or hose comes out with light force,
then the hose was not fully seated into the
connection and can be re-inserted again.
3. If for some reason the fi tting or hose needs to be
released from the connection, depressing the
colored plastic ring (while gently pulling on the
hose or fi tting) releases the hose or fi tting from
the connection (Figure 7) .
Figure 7. Elbow fi tting installed in coalescing fi lter drain
Colored ring:
push up to
release elbow
from drain
fi tting
Elbow Fitting