39
(Note 1) Type 2 is a code ID mark system compliant with the AIM USA "Guidelines on Symbology Identifiers." The m" suffix
is a modifier character that differs depending upon options of individual symbologies as defined below.
Code Type
"m"
(Modifier
character)
Options
0 Model
1
QR Code
1 Model
2
0
mode 4, mode 5
MaxiCode
1
mode 2, mode 3
1 ECC-200
2
ECC-200 (FNC1 in the 1st or 5th character position from start code)
2D
codes
Data Matrix
3
ECC-200 (FNC1 in the 2nd or 6th character position from start code)
0
Scanning enabled, without a check digit
1
Scanning enabled, with a check digit
(Check digit transmission enabled)
Interleaved
2of5
3
Scanning enabled, with a check digit
(Check digit transmission disabled)
0
Scanning enabled, without a check digit
1
Scanning enabled, with a check digit
(Check digit transmission enabled)
Code 39
3
Scanning enabled, with a check digit
(Check digit transmission disabled)
0
Scanning enabled, without a check digit
1
Scanning enabled, with a check digit
(Check digit transmission enabled)
Codabar
3
Scanning enabled, with a check digit
(Check digit transmission disabled)
0
No FNC1 in the 1st and 2nd character positions from start code
Bar
codes
Code 128
2
FNC1 in the 2nd character position from start code
Example: The code ID mark for Interleaved 2of5 with option "Scanning enabled, with a check digit (Check digit
transmission disabled)" is ]I3.
]: Flag character (ASCII 93h)
I: Code character (Interleaved 2of5)
3: Modifier character (See the table above.)
(Note 2) For code ID marks not compliant with the AIM USA "Guidelines on Symbology Identifiers," the same characters as
ones defined in Type 1 apply.
(Note 3) These code ID marks are contained in code data.
(Note 4) RSS represents: RSS-14, RSS-14 Truncated, RSS-14 Limited, RSS-14 Stacked, RSS Expanded, RSS-14 Stacked
Omnidirectional, and RSS Expanded Stacked.
