Chapter 2. Development Environment and Procedures
11
2.1 Overview of Development Environ-
ment
The following hardware and software are required for developing user programs:
2.1.1 Required Hardware
■
Personal computer
Use a computer operating with Windows95/98 or WindowsNT4.0/Windows2000.
■
BHT (Bar code handy terminal)
Any of the following BHTs is required:
• BHT-100Q
• BHT-100B
■
CU (Optical communications unit)
For IrDA communication, the following CU is required. Note that no CU is required if the BHT
is directly connected with the host computer via the direct-connect interface.
• CU-7000
(Option. Required if the host computer has no IR interface port.)
■
RS-232C interface cable
This cable connects the CU with the personal computer.
NOTE
The RS-232C interface cable should have the connector and pin assignment required
by the personal computer.
(For information about the connector configuration and pin assignments of the CU,
refer to the BHT User’s Manual.)
Summary of Contents for BHT-BASIC 100 SERIES
