Chapter 14. Statement Reference
270
In any of the following cases, the BHT ends the split code scanning sequence
even in midway. If it happens in the edit mode, all read data will be discarded.
• The BHT reads a non-split code.
The non-split code data will be stored in the barcode buffer.
• The BHT reads a split code of any other QR Code.
The current sequence ends and a new sequence starts.
• In the momentary switching mode, alternate switching mode, or continu-
ous reading mode, you pull the BHT's reading window away from a code
for three seconds or more. Or in the auto-off mode, five seconds or more
have passed after the BHT read a split code.
• You turn the illumination LED off by pressing the trigger switch.
That is, in the momentary switching mode or auto-off mode, you release
the trigger switch. In the alternate switching mode, you press the trigger
switch again.
The BHT is so designed that it does not read codes except for QR Code in
the split code scanning mode. Once it goes out of that mode, it can read
both bar codes and 2D codes.
PDF417 (
Y
)
Syntax :
Y
MaxiCode (
X
)
Syntax :
X
Data Matrix (
Z
)
Syntax :
Z
Summary of Contents for BHT-BASIC 100 SERIES
