manualshive.com logo in svg

Denso BHT-400-CE, Reference Manual

Share
Download
Denso BHT-400-CE Reference Manual Download Page 87

 

- 81 -

 

 

The BHT-400B supports universal product codes, Interleaved 2of5 (ITF), Codabar (NW-7), Code-39, 
Code-93, Code-128, Standard 2of5 (STF), and MSI. It can also read EAN-128 if Code-128 is specified. 

 

• 

Universal product codes (A) 

[Syntax] 

A [:[code] [1

st

 character [2

nd

 character]][supplemental]] 

 

Specify a code from one of the following. 

Code  Barcode Type 
A 

EAN-13 (JAN-13), UPC-A 

B EAN-8 

(JAN-8) 

C UPC-E 

 

If the code

 

is omitted, it will be possible to read any of the above universal product codes. 

The 1

st

 character and 2

nd

 character are flag characters representing the country code, and each must 

be a numeral between 0 and 9 (inclusive). If a question mark (?) is specified for the 1

st

 character or 2

nd

 

character, it is treated as a wild card. 

“supplemental” refers to the reading of an add-on code. Specifying an S for add-on enables the BHT to 
read barcodes with an add-on code also. 

 

[Ex.]) To enable the BHT to scan EAN-13 with 1

st

 character "4", 2

nd

 character "9", and 

add-on code: 

[VB]  MyScanner.RdType = "A:49S" 

[C#] MyScanner.RdType = "A49S"; 

 

[Ex.] To enable the BHT to scan EAN-13 and EAN-8 only: 

[VB]  MyScanner.RdType = "A:A,A:B" 

[C#]  MyScanner.RdType = "A:A,A:B"; 

 

Summary of Contents for BHT-400-CE




























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands