Denso BHT-400-CE Reference Manual Download Page 270

Page: 270 / 347

- 264 -

Shutdown

Shuts down the power in such a way that the next time the system is turned ON, it will start up in
the mode specified by the parameter.

￭

Syntax

[VB]

Public Shared Sub

Shutdown

(ByVal

mode

EN_SHUTDOWN_MODE

)

[C#]

public static void

Shutdown

(

EN_SHUTDOWN_MODE

mode

)

￭

Parameters

mode

[in] Mode to be entered at the time of start-up

Parameter values: As listed in EN_SHUTDOWN_MODE

￭

Return value

None

￭

Exceptions

Name of Exception

Meaning

ArgumentException The

specified mode is invalid.

￭

Note

After warm booting

After cold booting

Files in the FLASH folder

Retained

Files in the RAM

Retained

Lost

Contents of the Registry

Retained

Lost (*)

Data being edited

Lost

(*) If the Registry has been backed up, the backup copy will be used.

Summary of Contents for BHT-400-CE




























































































































































































































































































































































Search results

Summary of Contents for BHT-400-CE

Reviews:

Brands by name

Popular brands

Denso BHT-400-CE, Reference Manual

Search results

Summary of Contents for BHT-400-CE

Reviews:

Brands by name

Popular brands