Denso BHT-400-CE Reference Manual Download Page 101

Page: 101 / 347

- 95 -

LastType

Acquires the type of code that was read last.

“0” is stored if no barcodes are read since the BHT was last started up.

￭

Syntax

[VB]

Public Property

ReadOnly

LastType

Integer

[C#]

public int

LastType

{

get

}

￭

Property

Type of barcode that was read last

The correlation between the barcode type and values is the same as that for the
InBufferType.

Default value: 0 (Nothing in VB.NET)

￭

Exceptions

None

￭

Note

The value is "0" if no barcode is read after an instance of the Scanner class was created.

The value remains unchanged even if barcode reading is disabled.

[Ex.] Acquire the code type for the data last read.

[VB] Dim count As Integer = MyScanner.LastCount

[C#] int count = MyScanner.LastCount;

Summary of Contents for BHT-400-CE




























































































































































































































































































































































Search results

Summary of Contents for BHT-400-CE

Reviews:

Brands by name

Popular brands

Denso BHT-400-CE, Reference Manual

Search results

Summary of Contents for BHT-400-CE

Reviews:

Brands by name

Popular brands