manualshive.com logo in svg

Denso BHT-400-CE, Reference Manual

Share
Download
Denso BHT-400-CE Reference Manual Download Page 323

 

- 317 -

 

 

Path 

Specifies the folder in which the send file or receive file is [to be] located. 

 

￭ 

Syntax 

[VB] 

Public Property

 

Path

 As 

String

 

 

[C#] 

public string 

Path

 

{

get

; 

set

}

 

 

￭ 

Property 

Absolute path 

Default value: @"\" 

Maximum length: 259 characters (including the path name and the file name) 

 

￭ 

Exceptions 

Name of Exception 

Meaning 

PathTooLongException The 

path name is too long. 

 

￭ 

Note 

The value specified for this property will be valid the next time a send or receive operation is 
performed. 

If an invalid value is specified for this property, no exceptions will be thrown immediately; 
however, an exception will be thrown later when an attempt is made to send or receive 
data. 

 

[Ex.] Set the file receipt destination folder to FLASH\. 

[VB]  MyFileTransfer.Path = "\FLASH\" 

[C#] MyFileTransfer.Path = @"FLASH"; 

Summary of Contents for BHT-400-CE




























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands