manualshive.com logo in svg

Denso BHT-400-CE, Reference Manual

Share
Download
Denso BHT-400-CE Reference Manual Download Page 33

 

- 27 -

 

11.2. Suspend Transition Conditions 

The BHT switches to suspend when the power key is pressed, when the event that prohibits suspend has been 
completed and the auto power OFF time has elapsed, and when the method used to switch to suspend is called 
from the application. 

 

Events that prohibit suspend 

- Wireless connection open (Excludes BHT-400 models used in USA and Canada.) 

- IrDA connection open 

- Connector communication being performed 

- Key being pressed 

- Touch panel being tapped 

The auto power OFF time when the BHT is powered by the battery and when it is installed on the CU can be set or 
acquired at the PwrMng.Settings.AutoPowerOffBattery and AutoPowerOffExt properties, respectively. Auto power 
OFF can be disabled by setting this property to “0”. 

It is also possible to switch to suspend from the application by calling up the PwrMng.Shutdown method. 
Furthermore, operation after the transition to suspend can be specified by setting the parameters for the methods. 

Parameter 

Description 

WARM 

Warm boot is performed after power OFF. There is no need to turn the 
power ON, the contents of the RAM are retained. 

SUSPEND 

The BHT switches to suspend. Press the power key to turn ON the power. 
The contents of the RAM are retained provided that the sub-battery does 
not become fully discharged.   

COLD_BOOT_REGINIT 

The BHT cold boots automatically after power OFF. The contents of the 
RAM are deleted, and the registry is reinitialized. 

COLD_BOOT_REGREMAIN 

The BHT cold boots automatically after power OFF. The contents of the 
registry at this time are saved, and then restored when the BHT is started 
up. 

SYSMODIFY 

The BHT cold boots automatically after power OFF, and the consecutive 
RAM allocation is maintained. 

COLD 

The BHT cold boots automatically after power OFF,. If the registry has been 
saved, the BHT is booted based on the values for that registry, however, if it 
has not been saved, the BHT is booted based on the values for the default 
registry value. 

 

 

Warm boot and cold boot 

The memory contents retention status differs between warm boot and cold boot. 

 

Warm Boot  Cold Boot

Files in flash memory 

●

 

●

 

Files in RAM 

●

 

– 

Data being edited 

– 

– 

Registry information 

●

 

– (*1) 

 

(*1) If the registry is saved, the information is restored to the values at the point it is saved.   

Summary of Contents for BHT-400-CE




























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands