Denon DVD-770SD, Operating Instructions Manual

Page: 15 / 31

3
15
ENGLISH
3
w
When “96k LPCM OUT” is selected:
Press the ENTER button several times and select the conversion
mode.
96k (Factory default)
When playing linear PCM DVDs that are not copyright-
protected, for 2-channel PCM audio signals up to 96 kHz,
linear PCM signals are output as such without being
converted from the digital outputs.
PCM signals of 48 kHz/16 bits and lower are output, regardless
of whether they are copyright-protected or not.
For DVDs containing multi-channel PCM signals, the digital
signals are down-mixed for output into two channels, front left
and right. (Only the front left and right channels are output for
sources for which down-mixing is prohibited.)
When playing copyright-protected linear PCM DVDs, in
consideration of copyrights, no digital signals are output
for sources exceeding 48 kHz/16 bits. When playing such
sources, either set to “96k>48k” or make analog
connections. (See page 9.)
96k>48k
Linear PCM and packed PCM signals are converted to 44.1
kHz or 48 kHz and output. (The PCM digital audio output
signals are converted to 48 kHz or less in consideration of
copyrights.) When making digital connections to an AV
amplifier that is not compatible with 96 kHz/88.2 kHz signals,
set to “96k>48k”.
When playing DVDs recorded in linear PCM or packed
PCM and the unit is set to output digital and analog audio
signals simultaneously, the analog audio output signals
are also converted to 48 kHz or below, so we recommend
setting to “96k” and also making analog connections.
e
When “DOWNMIX” is selected:
Press the ENTER button several times and select the output
format.
LT/RT (Factory default)
Set this when connecting the unit to a Dolby Pro Logic decoder.
STEREO
Set this when connecting the unit to a stereo device.
r
When “COMPRESSION” is selected:
OFF (Factory default)
Select this for the standard range.
LEVEL
Select this to achieve powerful sound even when the
volume is low. This setting is suited for watching DVDs
late at night with the volume low. (This setting is only
valid for DVDs recorded in Dolby Digital.)
✽
To exit the setup mode
Press the RETURN or SETUP button.
Remote control unit Remote control unit
SELECT SET ENT E R BUTTON
AUDIO SETUP
DIGITAL OUT
DOWNMIX
96K LPCM OUT
COMPRESSION
NORMAL
96K
LT/RT
OFF
SET 96K LPCM TO 48K OUT
SELECT SET ENT E R BUTTON
AUDIO SETUP
DIGITAL OUT
DOWNMIX
96K LPCM OUT
COMPRESSION
NORMAL
96K
LT/RT
OFF
SET DOWNMIX MODE
SELECT SET ENT E R BUTTON
AUDIO SETUP
DIGITAL OUT
DOWNMIX
96K LPCM OUT
COMPRESSION
NORMAL
96K
LT/RT
OFF
DYNAMIC RANGE COMPRESSION
When “DISC SETUP” is selected
TOP MENU
/PBC
MENU
RETURN ANGLE
DISPLAY STOP STILL /PAUSE PLAY
RC-963
ENTER
SETUP NTSC/PAL ZOOM SLIDE SHOW
SLOW/SEARCH SKIP
2,3
1
2
Use the • and ª cursor buttons to select the desired setting,
then press the ENTER button.
DIALOG
Use this to set the language of the sound output from the
speakers.
SUBTITLE
Use this to set the language of the subtitles displayed on the
TV.
DISC MENUS
Use this to set the language of the menus recorded on the
disc (top menu, etc.).
ANGLE MARK
Angle marks are displayed/not displayed on the screen.
CAPTIONS
Use this to set whether or not to display the closed captions
recorded on DVDs.
NOTE:
Angle marks and captions are displayed when “SET UP
MENU MODE” at “SYSTEM SETUP” is set to “EXPERT”.
SELECT SET ENT E R BUTTON
DISC SETUP
DIALOG
DISC MENUS
SUBTITLE
ANGLE MARK
CAPTIONS
ENGLISH
OFF
ENGLISH
ON
OFF
SET DISC LANGUAGE ( DIALOG )
1
See page 12.
Remote control unit Remote control unit
Remote control unit Remote control unit
q
When “DIALOG” is selected:
Press the ENTER button several times and select the
language.
ENGLISH (Factory default)
Select this when you want to play the DVD with the
sound in English.
FRENCH
Select this when you want to play the DVD with the
sound in French.
SPANISH
Select this when you want to play the DVD with the
sound in Spanish.
GERMAN
Select this when you want to play the DVD with the
sound in German.
ITALIAN
Select this when you want to play the DVD with the
sound in Italian.
OTHERS
Use the number buttons to input the language number.
(See “Language code list” on page 16.)
SELECT SET ENT E R BUTTON
DISC SETUP
DIALOG
DISC MENUS
SUBTITLE
ANGLE MARK
CAPTIONS
ENGLISH
OFF
ENGLISH
ON
OFF
SET DISC LANGUAGE ( DIALOG )