9
DISASSEMBLY
• Disassemble in order of the arrow in the following figure.
• In the case of the re-assembling, assemble it in order of the reverse of the following flow.
• In the case of the re-assembling, observe "attention of assembling".
• If wire bundles are untied or moved to perform adjustment or replace parts etc., be sure to rearrange them neatly as
they were originally bundled or placed afterward.
Otherwise, incorrect arrangement can be a cause of noise generation.
CX870 MODULE
Refer to
"DISASSEMBLY
2. CX870 MODULE"
and
"EXPLODED VIEW"
CX870 MODULE
(Ref. No. of EXPLODED VIEW : C and D)
POWER PWB UNIT
Refer to
"DISASSEMBLY
3. POWER PWB UNIT"
and
"EXPLODED VIEW"
POWER PWB UNIT
(Ref. No. of EXPLODED VIEW : A/B/D)
SPEAKER DRIVER (TWEETER)
Refer to
"DISASSEMBLY
4. SPEAKER DRIVER (TWEETER)"
and
"EXPLODED VIEW"
SPEAKER DRIVER (TWEETER)
(Ref. No. of EXPLODED VIEW : B)
SPEAKER DRIVER (WOOFER)
Refer to
"DISASSEMBLY
5. SPEAKER DRIVER (WOOFER)"
and
"EXPLODED VIEW"
SPEAKER DRIVER (WOOFER)
(Ref. No. of EXPLODED VIEW : B)
AMPLIFIER PWB UNIT
Refer to
"DISASSEMBLY
7. AMPLIFIER PWB UNIT"
and
"EXPLODED VIEW"
AMPLIFIER PWB UNIT
(Ref. No. of EXPLODED VIEW : C)
DOCK CONNECTOR & OLED ASSY
Refer to
"DISASSEMBLY
6. DOCK CONNECTOR & OLED ASSY"
and
"EXPLODED VIEW"
DOCK CONNECTOR & OLED ASSY
(Ref. No. of EXPLODED VIEW : B)
TOUCH KEY PWB UNIT
Refer to
"DISASSEMBLY
8. TOUCH KEY PWB UNIT"
and
"EXPLODED VIEW"
TOUCH KEY PWB UNIT
(Ref. No. of EXPLODED VIEW : A/D)
BOTTOM COVER
SPEAKER GRILL
FRONT CABINET
MAIN PWB UNIT
Refer to
"DISASSEMBLY
1. MAIN PWB UNIT"
and
"EXPLODED VIEW"
MAIN PWB UNIT
(Ref. No. of EXPLODED VIEW : C and D)
Summary of Contents for DSD-500
