TECHNICAL SPECIFICATIONS
n
Audio section
• Power amplifier
Rated output :
2-channel driving
35 W + 35 W (8Ω、1kHz T.H.D 0.01 %)
Dynamic power :
70 W + 70 W (4Ω、1kHz T.H.D 0.01 %)
Output connectors : Speaker：impedance 4～16Ω
Compatible with headphones / stereo headphones
Input sensitivity/Input impedance : 200 mV / 22 kΩ
Total harmonic distortion (1kHz、17.5W、8Ω) : Analog In：0.04 %
S/N ratio (35W、8Ω、IHF-A) : Digital In : 110dB
Tone control :
Bass：±8dB(100Hz)
Treble：±8dB(12 kHz)
Frequency response : Analog In：20Hz～96kHz
n
Wireless LAN section
Network type (wireless LAN standard) : Conforming to IEEE 802.11b
Conforming to IEEE 802.11g
Conforming to IEEE 802.11n
(Wi-Fi® compliant)
z
1
Security :
WEP 64 bit, WEP 128 bit
WPA/WPA2-PSK (AES)
WPA/WPA2-PSK (TKIP)
Radio frequency :
2.4 GHz
No. of channels :
1 - 13 ch (for E2, JP)
z
1 The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo
are registered trademarks of the Wi-Fi Alliance.
n
Bluetooth section
Communications system : Bluetooth Version 2.1 + EDR
(Enhanced Data Rate)
Transmission power : Maximum 2.5 mW (Class 2)
Maximum communication range : Approx. 32.8 ft/10 m in line of sight
z
2
Frequency band :
2.4 GHz band
Modulation scheme : FHSS (Frequency-Hopping Spread Spectrum)
Supported profiles : A2DP (Advanced Audio Distribution Profile)1.2
AVRCP (Audio Video Remote Control Profile)1.4
Corresponding codec : SBC, AAC
Transmission range (A2DP) : 20 Hz - 20,000 Hz
z
2 The actual communication range varies depending on the influence of
such factors as obstructions between devices, electromagnetic waves
from microwave ovens, static electricity, cordless phones, reception
sensitivity, antenna performance, operating system, application
software etc.
n
General
Power supply : (for E2) :
AC 220 - 230 V, 50 Hz / 60 Hz
(for JP) :
AC 100 V, 50 Hz / 60 Hz
Power consumption :
60 W
Power consumption in standby mode : 0.3W
Power consumption in "Network Control" –"On" mode : 3W
For purposes of improvement, specifications and design are subject to
change without notice.
9
