Denon DN-700R, Owner'S Manual

Page: 84 / 119

Part names and
Functions
Setting defaults
Connections
Playback
Selecting
Files and
Folders
Getting Started
Control
Function
78
Selecting
Media
Recording
Edit Function
Information
G Playback H
Symptom Cause/Solution Page
Cannot perform
playback or does not
recognize a file.
• The recording media could be a cause of this trouble. Copy a file
to another recording media and retry playback.
• Check whether this unit supports the format of the playback
file.
• Check whether the target folder is within the first 8 levels of
the root directory.
• Check whether the number of folders does not exceed 1000.
This unit recognizes up to 1000 folders.
–
–
28
28
No sound is produced
from the headphones. • Make sure that the headphone volume level adjustment switch
(LEVEL) is not set to MIN.
• Check whether sound is reproduced from the headphones by
using another audio file or recording media.
12
–
Poor sound quality
for playback on a
computer. • Check the software of your computer.
• Check the frequency conversion program.
• This unit can record audio files using sampling frequencies of
48kHz and 96kHz. Some of the computer programs convert
the frequency to 44.1kHz (a sample rate converter is used).
Use a higher quality sample rate converter.
–
–
Cannot read the files
on a computer. • Check the functions of the computer software. Some playback
and editing programs may not support the recording format of
this unit (PCM 24 bits, 96kHz, etc.).
–
Troubleshooting
G Recording media H
Symptom Cause/Solution Page
The media is not
shown in the display
even though it is
connected. • Sometimes this unit cannot recognize media because of a
defective connection. Check the connection of the media.
• This unit supports USB mass-storage class flash memory and
USB external storage. It does not recognize USB drives other
than the above.
• You cannot connect USB devices to this unit via a USB hub.
• Make sure to supply external power to the type of USB hard
disk drives that can connect to the external power source via
AC adapter, etc.
70
70
70
–
The media icon is
displayed, but the unit
does not recognize
a file.
• Check the display and make sure that the currently selected
media and the actual media that you want to use are the same.
If they are not the same, display the media list to select the
media to be used. 27
G Operation H
Symptom Cause/Solution Page
Cannot add a character
during renaming. • If the maximum number of characters has been already entered,
you cannot add any more characters. To add a character, delete
characters before adding. 79