32
ABOUT REPLACE THE MICROPROCESSOR WITH A NEW ONE
When replaced of the U-PRO (Microprocessor) or the Flash ROM, confirm contents of the following.
PWB Name Ref. No.
Description
After
replaced
Remark
MAIN
IC403
R5F56108VNFP
B
-
30
CX870-3B-D60
JUKEBOX NETWORK 2ANT 64M SDRAM NEW F/W
B
After replaced
A
: Mask ROM (With software). No need write-in of software to the microprocessor.
B
: Flash ROM (With software). Usually, no need write-in of software. But, when the software was updated, you should be
write-in of the new software to the microprocessor or flash ROM. Please check the software version.
C
: Empty Flash ROM (Without software). You should be write-in of the software to the microprocessor or flash ROM. Refer
to "Update procedure" or "writing procedure", when you should be write-in the software.
Summary of Contents for CEOL Piccolo DRA-N5
