11
DISASSEMBLY
• Disassemble in order of the arrow in the following figure.
• In the case of the re-assembling, assemble it in order of the reverse of the following flow.
• In the case of the reassembling, observe "Caution concerning disassembly and assembly!".
• If wire bundles are untied or moved to perform adjustment or replace parts etc., be sure to rearrange them neatly as
they were originally bundled or placed afterward.
Otherwise, incorrect arrangement can be a cause of noise generation.
FRONT PANEL ASSY
Refer to
"DISASSEMBLY
3. FRONT PANEL ASSY"
and
"EXPLODED VIEW"
FRONT PANEL ASSY
(Ref. No. of EXPLODED VIEW :
2)
SMPS PCB ASSY
Refer to
"DISASSEMBLY
4. SMPS PCB ASSY"
and
"EXPLODED VIEW"
SMPS PCB ASSY
(Ref. No. of EXPLODED VIEW : 18)
AMP PCB ASSY
Refer to
"DISASSEMBLY
5. AMP PCB ASSY"
and
"EXPLODED VIEW"
AMP PCB ASSY
(Ref. No. of EXPLODED VIEW :
52)
MAIN PCB ASSY
Refer to
"DISASSEMBLY
2. MAIN PCB ASSY"
and
"EXPLODED VIEW"
MAIN PCB ASSY
(Ref. No. of EXPLODED VIEW :
29)
TOP COVER
Refer to
"DISASSEMBLY
1. TOP COVER"
and
"EXPLODED VIEW"
TOP COVER
(Ref. No. of EXPLODED VIEW :
33)
Summary of Contents for CEOL Piccolo DRA-N5
