Denon AVR-S730H Service Manual Download Page 144

Page: 144 / 148

Copy the Service Region Settings from the USB flash drive to this unit.

4.1. Creating a Service Region Settings file

(1) Click [Start button] - [Accessories] - [notepad] on the PC to launch the notepad.

(2) Enter "

TEXT

(3) Click "

File

", and then click "

Save As...

(4) Enter the file name and click the Save button.

NOTE : Enter the file name in double quotation marks. (The file extension is not required.)

Service Region

File name

North America

"denon-config-locale-set-1"

Europe

"denon-config-locale-set-2"

Japan

"denon-config-locale-set-3"

Australia

"denon-config-locale-set-4"

Korea

"denon-config-locale-set-5"

China

"denon-config-locale-set-6"

Israel

"denon-config-locale-set-7"

(5) Copy the files created on the USB flash drive.

4.2. Starting Service Region Settings

NOTE :

• Remove the LAN cable from this unit when updating.

(Do not connect to a wired or wireless network.)

• We recommend a USB memory device that has an LED installed.

(1) Press the power button to turn on the power.

(2) Wait for this unit to start up.

(3) Set the input source to HEOS Music.

Check that the display is as shown below.

–TuneIn Internet Radio

No Network Connection

Content of the display is scrolled.

(4) Insert the USB flash drive into the USB port.

(5) Wait for at least 10 seconds before removing the USB flash drive.

( If the USB flash drive has an LED, this LED will be flashing. Remove the USB flash drive when the LED

stops flashing.)

copy to USB flash drive

Download ﬁrmware

in USB ﬂash drive.

4. Update Method for Service Region Settings

144

Caution in

servicing

Electrical

Mechanical

Repair Information

Updating

Summary of Contents for AVR-S730H





















































































































































Search results

Summary of Contents for AVR-S730H

Reviews:

Related manuals for AVR-S730H

Brands by name

Popular brands

Denon AVR-S730H, Service Manual

Search results

Summary of Contents for AVR-S730H

Reviews:

Related manuals for AVR-S730H

Brands by name

Popular brands