63
After starting playback
[1] Adjusting the sound quality (TONE)
The tone control function will not work in the PURE DIRECT and the
DIRECT mode.
1
The tone switches as follows each time
the TONE CONTROL button is pressed.
2
With the name of the volume to be
adjusted selected, turn the SELECT knob
to adjust the level.
SELECT
NOTE:
To prevent hearing loss, do not raise the volume level excessively
when using headphone.
[3] Turning the sound off temporarily (MUTING)
1
Use this to mute the audio output
temporarily.
Press the MUTING button.
Cancelling MUTING mode.
Press the MUTING button again.
1
1
• To increase the bass or treble: Turn the control clockwise.
(The bass or treble sound can be increased to up to +6 dB
in steps of 1 dB.)
• To decrease the bass or treble: Turn the control clockwise.
(The bass or treble sound can be decreased to up to –6 dB
in steps of 1 dB.)
[2] Listening over headphone
1
Plug the headphone’ plug into the
jack.
Connect the headphone to the
PHONES jack.
The pre-out output (including the
speaker output) is automatically
turned off when headphone are
connected.
1
PHONES
2
1
3
(Main unit)
(Remote control unit)
BASS
TREBLE
3
If you do not want the bass and treble to
be adjusted, turn on the tone defeat
mode.
The signals do not pass through the
bass and treble adjustment circuits,
providing higher quality sound.
[4] Combining the currently playing sound with the desired image
1
Simulcast playback
Use this switch to monitor a video source other than the audio
source.
Press the VIDEO SELECT button, turn the FUNCTION knob
until the desired source appears on the display.
VIDEO
SELECT
Cancelling simulcast playback.
• Select “SOURCE” using the VIDEO SELECT button and
the FUNCTION button.
• Switch the program source to the component connected
to the video input.
• Press the SOURCE button.
1
1
1
1
(Main unit)
FUNCTION
V I D E O S O U R C E
F U N C T I O N
(Main unit)
(Main unit)
(Main unit)
Summary of Contents for AVR 2805 - AV Receiver
Page 99: ......
