77
DSP surround simulation
1
Select the surround mode for each input
channel.
The surround mode switches in the following order each time
the DSP SIMULATION button is pressed:
1
2, 4
3
4
2
Press the surround patameter button.
Display the surround parameter screen.
The screen for the selected surround
mode appears.
3
Set the parameters.
4
When the surround parameters are set using the buttons on
the main unit, stop operating buttons after completing the
settings. The settings are automatically finalized and the
normal display reappears after several seconds.
When the settings are made using the buttons on the remote
control unit, press the “ENTER” or “SURROUND
PARAMETER” button to finish.
NOTES:
• The surround speaker setting can also be changed with the SPEAKER button on the remote control unit.
• When “Default” is selected and the cursor left button is pressed, “CINEMA EQ.” and “D.COMP.” are automatically turned off, “ROOM
SIZE” is set to “medium”, “EFFECT LEVEL” to “10”, “DELAY TIME” to “30ms” and “LFE” to “0dB”.
• The “ROOM SIZE” expresses the expansion effect for the different surround modes in terms of the size of the sound field, not the actual
size of the listening room.
• When playing PCM digital signals or analog signals in the DOLBY PRO LOGIC
II
, DOLBY PRO LOGIC
II
x
,
DTS NEO:6 modes and the input
signal switches to a digital signal encoded in Dolby Digital, the Dolby surround mode switches automatically. When the input signal switches
to a DTS signal, the mode automatically switches to DTS surround.
WIDE SCREEN
JAZZ CLUB
SUPER STADIUM
ROCK ARENA
CLASSIC CONCERT
MONO MOVIE
VIDEO GAME
VIRTUAL
MATRIX
(Remote control unit)
(Remote control unit)
R O O M : M e d i u m
* S u r r P a r a m e t e r
(Remote control unit)
• To operate the surround mode and surround parameters from the remote control unit.
Summary of Contents for AVR 2805 - AV Receiver
Page 99: ......
