Denon AVR-2802, Service Manual

Page: 2 / 74

2
AVR-2802/982
SPECIFICATIONS
AUDIO SECTION
Power Amplifier
Rated output: Front: 90W + 90W (8
Ω
/ohms, 20Hz ~ 20kHz with 0.05% T.H.D.)
135W + 135W (6
Ω
/ohms, 1kHz with 0.7% T.H.D.)
150W + 150W (6
Ω
/ohms, EIAJ)
Center: 90W (8
Ω
/ohms, 20Hz ~ 20kHz with 0.05% T.H.D.)
135W (6
Ω
/ohms, 1kHz with 0.7% T.H.D.)
150W (6
Ω
/ohms, EIAJ)
Surround: 90W + 90W (8
Ω
/ohms, 20Hz ~ 20kHz with 0.05% T.H.D.)
135W + 135W (6
Ω
/ohms, 1kHz with 0.7% T.H.D.)
150W + 150W (6
Ω
/ohms, EIAJ)
Surround Back: 90W (8
Ω
/ohms, 20 Hz ~ 20kHz with 0.05% T.H.D.)
135W (6
Ω
/ohms, 1kHz with 0.7% T.H.D.)
150W (6
Ω
/ohms, EIAJ)
Dynamic power: 120W
×
2ch (8
Ω
/ohms)
170W
×
2ch (4
Ω
/ohms)
200W
×
2ch (2
Ω
/ohms)
Output terminals: Front: A or B 6 ~ 16
Ω
/ohms
A + B 8 ~ 16
Ω
/ohms
Center, Surround, Surr.Back: 6 ~ 16
Ω
/ohms
Analog
Input sensitivity/input impedance: 200mV/47k
Ω
/kohms
Frequency response: 10Hz ~ 100kHz: +0,
−
3dB (DIRECT mode)
S/N: 102dB (DIRECT mode)
Distortion: 0.005% (20Hz ~ 20kHz) (DIRECT mode)
Rated output: 1.2V
Digital
D/A output: Rated output

2V (at 0dB playback)
Total harmonic distortion

0.008% (1 kHz, at 0 dB)
S/N ratio

102dB
Dynamic range

96dB
Digital input: Format

Digital audio interface
Phono equalizer (PHONO input
    
REC OUT)
Input sensitivity: 2.5mV
RIAA deviation: ±1dB (20Hz to 20kHz)
Signal-to-noise ratio: 74dB (A weighting, with 5mV input)
Rated output/Maximum output: 150mV/7V
Distortion factor: 0.03% (1kHz, 3V)
VIDEO SECTION
Standard video jacks
Input/output level and impedance: 1Vp-p, 75
Ω
/ohms
Frequency response: 5Hz ~ 10MHz

+0,
−
3dB
S-video jacks
Input/output level and impedance: Y (brightness) signal

1Vp-p, 75
Ω
/ohms
C (color) signal

0.286Vp-p, 75
Ω
/ohms
Frequency response: 5Hz ~ 10MHz

+0,
−
3dB
Color component video jacks
Input/output level and impedance: Y (brightness) signal

1Vp-p, 75
Ω
/ohms
P
B
/C
B
(blue) signal

0.7Vp-p, 75
Ω
/ohms
P
R
/C
R
(red) signal

0.7Vp-p, 75
Ω
/ohms
Frequency response: 5Hz ~27MHz

+0,
−
3dB
TUNER SECTION
[FM] (note:
µ
V at 75
Ω
/ohms, 0dBf=1
×
10 -15 W) [AM]
Receiving Range: 87.50MHz ~ 107.90MHz 520kHz ~ 1710kHz
(for U.S.A., Canada and multiple voltage models) (for U.S.A., Canada and Multiple voltage models)
87.50MHz ~ 108.00MHz 522kHz ~ 1611kHz
(for Europe, Asia, China, Hong Kong, Taiwan R.O.C. and Multiple voltage models) (for Europe, Asia, China, Hong Kong, Taiwan R.O.C. and multiple voltage models)
Usable Sensitivity: 1.0
µ
V (11.2dBf) 18
µ
V
50dB Quieting Sensitivity: MONO: 1.6
µ
V (15.3dBf)
STEREO: 23
µ
V (38.5dBf)
S/N (IHF-A): MONO: 77dB
STEREO: 72dB
Total Harmonic Distortion (at 1kHz): MONO: 0.15%
STEREO: 0.3%
GENERAL
Power supply: AC120V, 60Hz (for U.S.A., Canada and Taiwan R.O.C. models)
AC230V, 50Hz (for Europe model)
AC220V, 50Hz (for China model)
AC115V/230V, 50/60Hz (for Asia, Hong Kong and Multiple voltage models)
Power consumption: 5.0A (for U.S.A.& Canada model)
270W (for Europe, Asia, China, Hong Kong and Multiple voltage models)
650W (for Taiwan R.O.C. model)
2.0W Max (Standby)
Maximum external dimensions: 434 (W)
×
171 (H)
×
416 (D)mm (17-3/32
″ ×
6-11/32
″ ×
16-3/8
″
)
Weight: 11.5kg (25 lbs 6 oz)
REMOTE CONTROL UNIT
(RC-903: for U.S.A., Canada, Asia, China, Hong Kong, Taiwan R.O.C. and Multiple voltage models)
(RC-904: for Europe model)
Batteries: R6P/AA Type (three batteries)
External dimensions: 70 (W)
×
215 (H)
×
24 (D)mm (2-3/4
″ ×
8-15/32
″ ×
15/16
″
)
Weight: 200g (Approx. 7 oz) (including batteries)
* For purposes of improvement, specifications and design are subject to change without notice.
SAFETY PRECAUTIONS
The following check should be performed for the continued protection of the customer and service technician.
LEAKAGE CURRENT CHECK
Before returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassis
resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the
power cord is less than 460 kohms, the unit is defective.
All manuals and user guides at all-guides.com