93
Menu map
For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page.
By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.
How to make detailed settings
Setting items
Detailed items
Description
Page
Audio
Surround Parameter
Adjusts surround sound parameters.
Tone
Adjusts the tonal quality of the sound.
Dialogue Level
Sets the output level to clarify the dialogue
output from the center channel.
Subwoofer Level
Sets the subwoofer on/off and its output level.
Restorer
Expands the low and high frequency components
of compressed audio to enable richer audio
playback.
Audio Delay
Compensates for incorrect timing between video
and audio.
Volume
Set the MAIN ZONE (room where the unit is
located) volume setting.
Audyssey
Makes Audyssey MultEQ®, Audyssey Dynamic
EQ® and Audyssey Dynamic Volume® settings.
Graphic EQ
Uses the graphic equalizer to adjust the tone of
each speaker.
Video
Picture Adjust
Adjusts the picture quality.
HDMI Setup
Makes settings for HDMI video/audio output.
Output Settings
Makes screen-related settings.
Volume Display
Sets where to display the master volume level.
Info Display
Displays status of operation temporarily when
the sound mode is changed, or input source is
switched. You can set whether or not to show
each of these status displays.
Audio Display
Sets how long each menu is displayed when the
input source is “NETWORK”, “iPod/USB”, or
“FM”.
TV Format
Set the video signal format to be output for the
TV you are using.
Setting items
Detailed items
Description
Page
Inputs
Input Assign
Changes input connector assignment.
Source Rename
Changes the display name for this source.
Hide Sources
Remove from the display input sources that are
not used.
Source Level
Adjusts the playback level of the audio input.
Input Select
Sets the audio input mode and decode mode.
Video Select
Video of another input source is played back
combined with the playing audio.
Speakers
Audyssey® Setup
The acoustic characteristics of the connected
speakers and listening room are measured and
the optimum settings are made automatically.
Manual Setup
Perform when setting the speakers manually
or when changing settings made in Audyssey®
Setup.
Network
Information
Display network information.
IP Control
Set the network function on/off during standby.
Friendly Name
The Friendly Name is the name of this unit
displayed on the network. You can change the
Friendly Name according to your preferences.
Settings
Make settings for wired LAN.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
A
dv
anced v
ersion
v
See overleaf
DVD
