Denon AVR-1913, Owner'S Manual

Page: 82 / 154

79
Speaker connection
Connecting 6.1-channel speakers using one surround back
speaker
If using only one surround back speaker, connect to the “L” side of the SURROUND BACK terminal.
For speaker settings in this case, see “When 6.1ch speakers are installed” (
v page 75 ).
To perform 6.1-channel playback using the surround back speaker, set “Assign Mode” to “Surround Back”
in steps 3 to 5 for “Set up “Amp Assign”” (
v page 84 ).
Also use the “Speaker Config.” setting ( v page 114 ) to set “Surr. Back” to “1spkr”.
Cables used for connections
Audio cable (sold separately)
Speaker
cable
Subwoofer
cable
NOTE
•
For speaker cable connections, see page 76 .
•
For speaker impedance , see page 76 .
FL FR
C
SL
SR
SW
SB
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
A
dv
anced v
ersion