Denon AVR-1712, Service Manual

Page: 42 / 161

42
1.3. Turn on the AV receiver
Operate the following. Turn on the AV receiver.
(1) Connect the power cable to the AC outlet while simultaneously pushing the "SLEEP" button and the "iPod
1
" button
of the front panel.
(2) Confirm the power indicator is green and "WRITTING" is displayed in the front panel.
1.4. Run the DFW
Run the "DFW_0052_AVR1712_(Rev.x.x.x).exe" on desktop of PC.
1.5. Communication check
(1) Select the serial port number of RS-232C in PC.
(2) Click the "Check Comm." button.
(3) When connection is good, then you can see the "Communication check OK." message.
(4) If connection is not good, then you can see the "Communication check NG" message.
Please confirm the following
(a) Check the connection of the AV receiver and PC. (refer to "
1.2. Connection of the AV receiver
" )
(b) Check the operation mode of the AV receiver. (refer to "
1.3.Turn on the AV receiver
")
(c) Check the selection of the RS-232C port number of PC.
1
2