demig Prozessautomatisierung GmbH
4
•
Chapter: Introduction
Manual Terminal DE-BT 1000
1.3.1.
Commands
1.3.1.1.
Delete Messages
Messages or errors in the status line can be blanked out by mouse click or by key
shortcut
[SHIFT] + [F7]
ausgeblendet werden.
1.3.1.2.
Configuration Menu
By the shortcut
[SHIFT] + [F8]
the configuration menu of the DE-BT 1000 is reached.
First you have to answer the security request
„Do you really want to open the DE-BT
1000 configuration?“
with
„Yes“
. In case of
„No“
as answer, the user returns to the main
display.
Different settings can be done in the configuration menu. The following list gives a
short overview of the setting possibilities. In case of a selection field, the possible
options are shown in the square brackets.
•
GID (device ID) [0-9]
•
UID (user ID) [0-9]
•
Baud rate RS485 [300, 600, 1200, 2400, 4800,
9600
, 19200, 38400]
•
Parity RS485 [
o=Odd,
e=Even, n=None]
•
Stop bits RS485 [1,
2
]
•
Baud rate RS232 [300, 600, 1200, 2400, 4800,
9600
, 19200, 38400]
•
Parity RS232 [
o=Odd,
e=Even, n=None]
•
Stop bits RS232 [1,
2
]
•
Active [RS232,
RS485
, NET]
•
Port number [1024-65535]
•
DHCP
•
IP address
•
Subnet mask
•
Default gateway
The GID and UID are used for the device addressing. Furthermore, the interface
configuration can be determined. That includes the serial interfaces RS232 and
RS485, as well as the IP configuration. Moreover, the interface, which should be used
for the communication with the host system, can be selected in the selection field
„Active“. For a communication via network (NET) the selected
Port
is used.
Summary of Contents for DE-BT 1000
Page 4: ......
