demig Prozessautomatisierung GmbH
Manual Terminal DE-BT 1000
Chapter: Service and Technical Data
•
13
2.2
Update of the System Software
2.2.1.
Necessary Material
•
External PC or Laptop with FTM (File Transfer Manager) and a connection to the
DE-BT 1000. This connection can be serial or via network.
•
Update file (e.g. via E-Mail) from demig Prozessautomatisierung GmbH. There
are 3 different update types:
•
File name:
•
update for:
•
200727os.tbz
•
Operating system and Kernel modules
•
200727xs.tbz
•
Surface
•
200735bt.tbz
•
Terminal Application
•
The first 6 figures of the file name describe the release date (year and calendar
week) of the update. Depending on the current software status of the DE-BTk
1000 it is not necessary to install all 3 update types. In case of several updates
the following sequence of the updates should be noted:
•
*os.tbz
→ *xs.tbz
→ *bt.tbz
2.2.2.
Starting the Update
1. Start the FTM on the computer.
2. Set the DE-BT 1000 in the update mode, see chapter 1.3.1.7.
3. Now connect the FTM with DE-BT 1000. As it is the same procedure as for the
controller, see the operation manual of the FTM.
4. Transmit then, by the FTM, the update to the DE-BT 1000. The question whether
to send the files or also to start the update has to be answered with „Make update
“. The update is then transmitted and automatically installed!
5. For the installation of further updates please repeat steps 1-4.
Summary of Contents for DE-BT 1000
Page 4: ......