19
Step 5.
Grasp bed release handle on tongue and pull
toward coupler. This releases the tilt bed to permit loading.
Step 7.
Drive vehicle onto the platform
-
front forward -
until tires touch the wheel stops at the front of each side of
the platform and the platform tilts to a flat position. Make
sure the car is centered on the platform. Towed vehicle tires
must fit in wheel troughs without overhanging sides. Engage
towed vehicle parking brake.
Shift loaded car into “park”
and lock steering wheel with front tires in a straight posi-
tion. If the car does not have a locking steering column
the steering wheel must be tied securely with front tires
in a straight position.
Rear Wheel Drive:
Disconnect towed vehicle driveshaft for
rear wheel drive vehicles with automatic transmission.
For manual transmission:
Consult your vehicle owners
manual for towing suitability with the drive shaft connected.
Step 8. Place one tie-down strap over each tire and secure
hooks to rods located at the rear of each wheel platform. The
short side of the hook must face the rear of the Kar Kaddy.
Step 9. Be sure tie-down winch is centered with the tire
before tightening straps.
Step 6.
With someone safely guiding you, slowly
drive vehicle onto platform
FRONT FORWARD.
(Any vehicle
mounted on tow dolly must be mounted with front of the
vehicle facing forward.) Drive the car forward until the tires
touch the ramps. Make sure the tire is aligned to ascend
onto the ramps.
Summary of Contents for Kar-Kaddy SS
Page 1: ...1 6 17 RD20018 Rev 12...
