13
WIRING OF THE TOWING VEHICLE
Connect wiring to towing vehicle, keeping in mind the color
code indicated below.
1.
Make certain towing vehicle lights are
“OFF”
.
2.
Connect
YELLOW
wire to left turn signal and stop wire in
the left rear of towing vehicle with the wire splicer (01883)
supplied.
3.
Connect
GREEN
wire to the right turn signal and stop
wire.
4.
Connect
BROWN
wire to tail light wire.
5.
VERY IMPORTANT
- connect
WHITE
wire to frame body
of towing vehicle. This is the common ground, and a clean
metal - to - metal contact must be made.
CAUTION:
Many flashers for vehicle turn signals will
not carry the additional load of Kar Kaddy turn signals.
If normal operation does not occur when connected to
the Kar Kaddy, a heavy duty replacement flasher may be
obtained through auto parts outlets.
WHITE
Ground
BROWN
Tail Lights, License Plate Lights,
Light Cluster Bar & Clearance Lights
YELLOW
Left Turn and Stop
GREEN
Right Turn and Stop
COLOR CODE FOR WIRING HARNESS
1
REF.
NO. PART NO. QTY.
DESCRIPTION
PARTS LIST
1.
11590
1 Tongue Wiring Harness
2.
14762
1 Main Frame Wiring Harness
3.
01863
1 Rubber Grommet (not shown)
Please order replacement parts by PART NO. and DESCRIPTION.
2
Wiring Diagram
TESTING LIGHTS BEFORE USE
1.
Make sure that the
WHITE
ground wire is connected to
the frame of both the Kar Kaddy and the towing vehicle.
2.
With headlights in
“ON”
position, the tail lights, the light
cluster bar, the license plate light, and the clearance lights
should be lighted.
3.
Start engine and have someone depress brake pedal.
Brake lights of tow dolly and towing vehicle should come
“on”
and
“off”
simultaneously with each application.
4.
Turn left turn signal on. Left turn light of Kar Kaddy and
towing vehicle should flash simultaneously. If turn signal
light of the trailer function opposite to those of the towing
vehicle, it is probable that the
YELLOW (Driver side)
and
GREEN (Passenger side)
wires have been reversed.
Check the plug connection under the tongue of the Kar
Kaddy to make sure wire colors are not crossed at that
point. If wires are crossed change them to match color
for color.
White
Yellow
Green
Brown
White
Brown
Yellow
Green
Summary of Contents for Kar-Kaddy SS
Page 1: ...1 6 17 RD20018 Rev 12...