18
Step 5. Grasp bed release handle on tongue and pull
toward coupler. This releases the tilt bed to permit loading.
Step 7. Drive vehicle onto the platform - front forward - until
tires touch the wheel stops at the front of each side of the
platform and the platform tilts to a flat position. Make sure the
car is centered on the platform. Towed vehicle tires must fit in
wheel troughs without overhanging sides. Engage towed
vehicle parking brake.
Shift loaded car into "park" and lock
steering wheel with front tires in a straight position. If the
car does not have a locking steering column the steering
wheel must be tied securely with front tires in a straight
position.
Rear Wheel Drive: Disconnect towed vehicle driveshaft for
rear wheel drive vehicles with automatic transmission.
For manual transmission: Consult your vehicle owners
manual for towing suitability with the drive shaft connected.
Step 8. Place one tie-down strap over each tire and secure
hooks to rods located at the rear of each wheel platform. The
short side of the hook must face the rear of the Kar Kaddy.
Step 9. Be sure tie-down winch is centered with the tire
before tightening straps.
Step 6. With someone safely guiding you, slowly drive ve-
hicle onto platform FRONT FORWARD. (Any vehicle mounted
on tow dolly must be mounted with front of the vehicle facing
forward.) Drive the car forward until the tires touch the ramps.
Make sure the tire is aligned to ascend onto the ramps.
Summary of Contents for Kar-Kaddy SS KK460SS
Page 1: ...1 7 06 RD20010 Rev 6...
Page 32: ...32 NOTES...
Page 34: ...34 Postage Dethmers Manufacturing Company 4010 320th Street Box 189 Boyden Iowa 51234...
Page 35: ...35 NOTES...
