DeLuxe Stitcher M27 Series, Operation And Maintenance Manual

Page: 9 / 44

Always disconnect the power supply before
making any adjustments or servicing the stitcher.

WARNING !
7
Some assembly is required upon delivery of the M27 Stitcher. You will need a flat screwdriver and a
9/16 open end wrench. Remove the packing materials from around the M27 and all contents from the
shipping boxes. Mount the Spool Bar Brackets (17282), which are already assembled with the Spool
Bar (17280) and the Wire Guide Spring Bracket Bar (17289), to the Stitcher with four (4) Screws
5/16-18x3/4 (P3318). Locate the Spool Stud (7693) and remove the Hex Nut (HN3816), Washer (PW38)
and Lock Washer (LW38) from the one end. Insert the threaded end of the Spool Stud into Spool Bar so
that it is lined up with the stitcher head already mounted to the Machine. Replace the Washers and Hex
Nut. Loosen the Thumb Screw (P2731) in the Set Collar (7691) to remove it and the Tension Spring
Assembly (Figure 1)
Figure 1 - Assembly
17282 (2)
63 (2)
P2731
7690
M11009
16148 (2)
PG10271
HN3816
7691
PW38
A1185
63 (2)
17145FA
425 (3)
17111
7693
WIRE SPOOL
CORRECT
PAYOFF
LW38
17161A
A1178
17149
G30164A (3)
17280
17289
P3318 (4)
15150LA