DeLuxe Stitcher M27 Series, Operation And Maintenance Manual

Page: 19 / 44

Always disconnect the power supply before
making any adjustments or servicing the stitcher.

WARNING !
The operator should periodically inspect all moving parts for signs of wear and when required,
replace those worn parts. For a complete list of common stitcher head wear parts, refer to the
Operator’s Manual for the specific Head. Some of these parts are two-sided so that when the cutting
or gripping surfaces show signs of wear, their position can be reversed to provide a new working
surface, which lengthens the life of the part.
Replacing Spare Parts
In time, you may need to replace some parts of the M27 Stitcher Machine. To do this locate
the DeLuxe Stitcher part number in one of the following diagrams and contact your Graphic Arts
Representative to order the replacement by part number, description and quantity.
Ordering Spare Parts
17
• the two (2) Slider Guide Rods (G30085) by the Adjuster Rail and by the Bender Rail Assembly
• the two (2) oil holes in the Clincher Rail (G30132)
• the lubrication points for the individual Stitcher Heads.
High friction areas should be lubricated with Red E-Lube Grease or any other Lithium-based
grease
once a year to prevent the areas from drying out. Remove the Screws (UA4810.5), securing the Left
Side Cover Plate (G30002) to expose the internal assemblies. Apply Grease in the following areas:
• the Bender Cam Assembly (G30066A)
• the Crank Shaft Assembly (G30007A)