DeLUX DPX12T, Installation & Operation Manual

Page: 34 / 383

4/3/2014
Instance Parameter
Factory
Setting
DELUX
Setting
Parameter Description
aI 1
Analog Input 1 (PID)
sen t[ r0.1k
Selects the type of sensor used
rt.l 2 3
Selects the leads in sensor
f
i
l
0.5 3
Filters erratic signal, for smoother PID calculations
i
.er
off on
Forces manual clear of input errrors
de[ 0 0
Selects precision of displayed units
s.ba off on
Enables or disables sensor backup
aI 2
Analog Input 2 (High Limit)
sen t[ r0.1k
Selects the type of sensor used
rt.l 2 3
Selects the leads in sensor
f
i
l
0.5 3
Filters erratic signal, for smoother PID calculations
i
.er
off on
Forces manual clear of input errrors
de[ 0 0
Selects precision of displayed units
lim7
Limit Function
l.sd both hi9h
Selects which instance limit function will trip
l.hy 3 20
Defines the high limit hystersis band
sp.lh 9999 260
Defines the upper range of the high limit set point
sp.ll -1999 0
Defines the lower range of the high limit set point
l.
i
t
no yes
Selects whether output and autotune are terminated when in limit state
loop 1
PID Loop 1
h.a9
p
i
d p
i
d Selects the heat control method
[.a9 off off
Selects the cool control method
t.tun no yes
Enables or disable TRU-TUNE+ adaptive tune automatically
t.a9r
[r
i
t [r
i
t
Selects the aggressiveness of the autotune funtion
ufa user user
Selects what output will do when user switches to manual mode
fa
i
l
user off
Selects what ouput will do when an input error switches control to manual mode
l.de no no
Enables or disables open-loop detction feature to monitor closed-loop operations
rp off off
Selects when controller will ramp to setpoint
l.sp -1999 50
Defines the lower range of the PID setpoint (temperature in automatic mode)
h.sp 9999 250
Defines the upper range of the PID setpoint (temperature in automatic mode)
sp.lo -100 0
Defines the lower range of the PID setpoint (% output in manual mode)
sp.h
i 100 100
Defines the upper range of the PID setpoint (% output in manual mode)
otpt 1
Output 1
o.ty volt m7a
Selects the type of output
fn heat heat
Selects which function will drive output
f
i 1 1
Selects the instance of the function selected above
s.lo 0.00 4.75
Defines the lower range of the scale for the universal process output
s.h
i
10.00 20.00
Defines the upper range of the scale for the universal process output
o.lo 0 0
Defines the low power scale, output will never be less than the value specified
o.h
i
100 100
Defines the high power scale, output will never be less than the value specified
o.[a 0.0 0.0
Defines an offset value to the process output
3
Output 3
fn off off
Selects which function will drive output
4
Output 4
fn
L
i
m7 L
i
m7
Selects which function will drive output
alm7 1
Alarm 1
a.ty off off
Selects whether the alarm trigger is a fixed value or will track set point
2
Alarm 2
a.ty off off
Selects whether the alarm trigger is a fixed value or will track set point
Menu
Watlow EZ-ZONE Temperature Controller / High Limit - Config. Record
Setup Page
To reach the Setup page hold the "up" and "down" arrow keys together for 6 seconds .