DeLUX DPX12T Installation & Operation Manual Download Page 311

Page: 311 / 383

SERIES 71, 72, AND 76 MODUTROL IV MOTORS

63-264008

Zero and Span Adjustment for

M7284Q, M7285Q, and M7294Q

M7284Q, M7285Q, and M7294Q actuators have the capability

of adjustable zero and span. Fig. 10 shows the module with the

zero and span potentiometers.

Zero:

Sets input voltage to define the 0% angle of rotation. It is

factory set to minimum position and can be adjusted to the

maximum position of 20mA or 10V.

Span:

Adjusts motor response to travel a full stroke through

the selected input span. It is factory set to maximum position,

and is adjustable from 4-20mA or 2-10Vdc.

Adjust the start potentiometer fully clockwise (maximum

zero) and the span potentiometer fully counterclockwise

(minimum span). See Fig. 10.

Set the controller current to the value required to drive

the motor to the closed position.

Turn the start potentiometer slowly counterclockwise

until the motor begins to open. This is defined as the

start or zero setting.

Set the controller current to the value required to drive

the motor to the fully open position. The motor will open.

Turn the span potentiometer clockwise until the motor

starts to close. The difference between the fully open

span position current and the zero position current is

defined as the operating span.

Recheck the start and readjust the span potentiometer if

necessary. Turn the start potentiometer clockwise to

increase the zero position.

Recheck the span and readjust the span potentiometer if

necessary. Turn it clockwise to increase the full span

position.

For sequential operation, as shown in Fig. 11, repeat the

above steps for each motor.

Fig. 10. Terminals and adjustments.

Î×ÙØÌñ×ÒÒÛÎ
ßËÈ×Ô×ßÎÇ ÍÉ×ÌÝØ

×ÒÒÛÎ ßËÈ×Ô×ßÎÇ
ÍÉ×ÌÝØ ÝßÓ øÞÔËÛ÷

ÐÑÉÛÎ
ÛÒÜ

ÑËÌÛÎ ßËÈ×Ô×ßÎÇ
ÍÉ×ÌÝØ ÝßÓ øÎÛÜ÷

ÔÛÚÌñÑËÌÛÎ
ßËÈ×Ô×ßÎÇ ÍÉ×ÌÝØ

ÒÑÌÛæ ÚÛßÌËÎÛÍ ßÊß×ÔßÞÔÛ ÑÒ ÍÑÓÛ ÓÑÜÛÔÍ ÑÒÔÇò

Óïíêìèß

øõ÷

øó÷

Ìî

Ìï

Î×ÙØÌñ×ÒÒÛÎ
ßËÈ×Ô×ßÎÇ ÍÉ×ÌÝØ

×ÒÒÛÎ ßËÈ×Ô×ßÎÇ
ÍÉ×ÌÝØ ÝßÓ øÞÔËÛ÷

ÐÑÉÛÎ
ÛÒÜ

ÑËÌÛÎ ßËÈ×Ô×ßÎÇ
ÍÉ×ÌÝØ ÝßÓ øÎÛÜ÷

ÔÛÚÌñÑËÌÛÎ
ßËÈ×Ô×ßÎÇ ÍÉ×ÌÝØ

ÒÑÌÛæ ÚÛßÌËÎÛÍ ßÊß×ÔßÞÔÛ ÑÒ ÍÑÓÛ ÓÑÜÛÔÍ ÑÒÔÇò

Çøõ÷

Ìî

Ìï

Ú øÌÛÍÌ÷

Êøó÷

î ÌÑ ïð ÊÜÝ ×ÒÐËÌ ÓÑÌÑÎÍ

ì ÌÑ îð ³ß ÒÑÒßÜÖËÍÌßÞÔÛ ×ÒÐËÌ ÓÑÌÑÎÍ

ÒÑÌÛæ ÚÛßÌËÎÛÍ ßÊß×ÔßÞÔÛ ÑÒ ÍÑÓÛ ÓÑÜÛÔÍ ÑÒÔÇò

ì ÌÑ îð ³ß ßÜÖËÍÌßÞÔÛ ×ÒÐËÌ ÓÑÌÑÎÍ

ÍÐßÒ ßÜÖËÍÌ ÐÑÌÛÒÌ×ÑÓÛÌÛÎ

ÍÌßÎÌ ßÜÖËÍÌ ÐÑÌÛÒÌ×ÑÓÛÌÛÎ

Î×ÙØÌñ×ÒÒÛÎ
ßËÈ×Ô×ßÎÇ ÍÉ×ÌÝØ

×ÒÒÛÎ ßËÈ×Ô×ßÎÇ
ÍÉ×ÌÝØ ÝßÓ øÞÔËÛ÷

ÐÑÉÛÎ
ÛÒÜ

ÑËÌÛÎ ßËÈ×Ô×ßÎÇ
ÍÉ×ÌÝØ ÝßÓ øÎÛÜ÷

ÔÛÚÌñÑËÌÛÎ
ßËÈ×Ô×ßÎÇ ÍÉ×ÌÝØ

Ìï

Ìî

øŠ÷

øõ÷

ÎÛÍÑÔËÌ×ÑÒ ÐÑÌÛÒÌ×ÑÓÛÌÛÎô ïêð ÑÒ ÓéîèìÝïðèíô
ÓéîèìÝïðçïô ÓéîèìÏïðèîô ßÒÜ ÓéîèìÏïðçð

Summary of Contents for DPX12T
































































































































































































































































































































































































Search results

Summary of Contents for DPX12T

Reviews:

Related manuals for DPX12T

Brands by name

Popular brands

DeLUX DPX12T, Installation & Operation Manual

Search results

Summary of Contents for DPX12T

Reviews:

Related manuals for DPX12T

Brands by name

Popular brands