DeLUX DPX12T Installation & Operation Manual Download Page 308

Page: 308 / 383

SERIES 71, 72, AND 76 MODUTROL IV MOTORS

63-264008

Attach the motor to the bracket with the four bolts

provided. See Fig. 4.

Fig. 3. Mounting the motor with an adapter bracket.

Damper Linkages

The motor does not include a crank arm. Order the crank arm

separately (see Accessories in the Specifications section). For

detailed instructions on the assembly of specific linkages, refer

to the Installation Instructions packed with the linkage.

CAUTION

Equipment Damage Hazard.

Stalling a motor can damage the drive shaft.

Ensure installation of motors and linkages allows the

motor to drive through full stroke without obstruction.

Valve Linkages

The Q100 Linkage requires a 220738A Adapter Bracket for all

valve applications. Applications with the Q5001 Valve Linkage

do not require the 220738A Adapter Bracket (see Fig. 4).

For detailed instructions on specific linkage assemblies, refer

to the instruction sheet packed with the linkage. In general,

check the following points when installing a motor and linkage:

Adjust valve and louver-type damper linkages so the damper

or valve moves through only the maximum required distance

while the motor moves through its full stroke.

With modulating control, maximum damper opening should

be no more than 60 degrees. Little additional airflow is

provided beyond this point.

Do not exceed load and torque ratings in any application.

Junction Box

When used with liquid-tight conduit connectors, the junction

box provides NEMA 3 weather protection for the motor. The

junction box, standard with replacement motors, encloses the

terminals and provides knockouts for wiring conduits. Housing

an internal transformer or internal auxiliary switches requires

using a junction box.

Óïèççç

ÛÏË×ÐÓÛÒÌ
ÞßÍÛ

ßÜßÐÌÛÎ
ÞÎßÝÕÛÌ

ÍÌßÒÜßÎÜ
ÞÑÔÌÍ øì÷

ÓÑÌÑÎ

ÞÑÔÌÍ
ÐÎÑÊ×ÜÛÜ øì÷

É×Î×ÒÙ
ÞÑÈ

ÒÑÒóÍÐÎ×ÒÙ ÎÛÌËÎÒ

ÍÐÎ×ÒÙ ÎÛÌËÎÒ

ï ýïî ÑÎ ïñìþ Æ×ÒÝ ÐÔßÌÛÜ
ÓßÝØ×ÒÛ ÍÝÎÛÉÍ ÑÎ ÞÑÔÌÍ

Summary of Contents for DPX12T
































































































































































































































































































































































































Search results

Summary of Contents for DPX12T

Reviews:

Related manuals for DPX12T

Brands by name

Popular brands

DeLUX DPX12T, Installation & Operation Manual

Search results

Summary of Contents for DPX12T

Reviews:

Related manuals for DPX12T

Brands by name

Popular brands