CAUTION:
25
or
2
and Barcode
PCB
Rev. or Version
2
Rev
1
up)
read bar-codes or
bar coded ticlcets.
is
as ordered per the customer's requirements as
follows:
1.
bar-code mode: to read ticlcets
bar code.
2.
Bar code mode: to read ticlcets
barcodes.
To change
mode:
1.
options
to be set properly (see option
16
on page
3
B in
user's manual).
2.
The
on the bar code reader board
to
be
properly (see the
diagrams of Bar code Reader PCB).
will NOT count properly if
steps are
set
correctly.
If you have
difficulty
these
or options,
please contact
Labs at
(2
15)
16.
NOTE:
Rev.25
above refers to the program
revision as annotated
the yellow label on the
main chip on the logic board. The Barcode
is
or Version 2 Rev
up
and
logic
board is
PAGE
21
